Keyword Index

A

  • Accumulative Roll Bonding Review on accumulative roll bonding of ultrafine grained and nanostructured sheets [Volume 6, Issue 4, 2019, Pages 37-51]
  • Adams Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]
  • Alloy A356 Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
  • Al/Mg composite Investigation of forming limit of multi-layered composite processed by roll bonding method [Volume 6, Issue 7, 2019, Pages 12-23]
  • Alumina Designing and manufacturing of functional diffusive machine and its performance evaluation in the fabrication of Al-Al2O3 samples [Volume 6, Issue 3, 2019, Pages 8-19]
  • Aluminum Designing and manufacturing of functional diffusive machine and its performance evaluation in the fabrication of Al-Al2O3 samples [Volume 6, Issue 3, 2019, Pages 8-19]
  • Aluminum Alloy Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
  • Aluminum alloy 5083 Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
  • Aluminum Alloy 6061-T6 Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
  • Aluminum powder Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2019, Pages 45-53]
  • Aluminum tube Experimental investigation of explosive forming of aluminum tubes using gas mixture [Volume 6, Issue 5, 2019, Pages 18-24]
  • Analysis of variance Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
  • Antioxidant additive Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
  • Artificial Neural Network Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2019, Pages 45-53]
  • Asymmetrical rolling Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
  • AZ61 Mg alloy Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]

B

  • Ball-end Mill Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
  • Bending Test Manufacture and Comparison of Mechanical Properties of Reinforced Polypropylene Nanocomposite with Carbon Fibers and Calcium Carbonate Nanoparticles [Volume 6, Issue 5, 2019, Pages 1-12]
  • Block and Palm Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]
  • Bobbin Tool Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
  • Bolted joint Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]
  • Brittle porous structure An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]

C

  • Calcium Carbonate Nanoparticles Manufacture and Comparison of Mechanical Properties of Reinforced Polypropylene Nanocomposite with Carbon Fibers and Calcium Carbonate Nanoparticles [Volume 6, Issue 5, 2019, Pages 1-12]
  • CAPP Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2019, Pages 1-12]
  • Carbon Fibers Manufacture and Comparison of Mechanical Properties of Reinforced Polypropylene Nanocomposite with Carbon Fibers and Calcium Carbonate Nanoparticles [Volume 6, Issue 5, 2019, Pages 1-12]
  • CFRP Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
  • Characterization Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
  • Charpy impact Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass kevlar hybrid fibers [Volume 6, Issue 2, 2019, Pages 10-19]
  • Chatter Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
  • Cold Re-Shape Rolling Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
  • Collapse Defect Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
  • Composites Designing and manufacturing of functional diffusive machine and its performance evaluation in the fabrication of Al-Al2O3 samples [Volume 6, Issue 3, 2019, Pages 8-19]
  • Contact point Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
  • Copper - Austenitic Stainless Steel Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]
  • Crushing test The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2019, Pages 1-9]
  • Crystal Percentage Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
  • Cutting force Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
  • Cutting Force Coefficients Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2019, Pages 43-53]
  • Cutting Speed Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2019, Pages 54-62]

D

  • Delamination Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
  • Dental Bur Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2019, Pages 43-53]
  • Dimensional Measurement Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2019, Pages 37-44]
  • Distortion Application of pre-heating in the reduction of distortion in the dissimilar joints welding SS type 304 and carbon steel A106-B [Volume 6, Issue 6, 2019, Pages 51-63]
  • Drilling Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
  • Drinking Water Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
  • Dynamic Chip Thickness Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2019, Pages 43-53]
  • Dynamic Modeling Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
  • Dynamic powder compaction Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2019, Pages 45-53]

E

  • ECAR Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
  • ECC Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
  • Effect of surface shape The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2019, Pages 1-9]
  • Electrical Discharge Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
  • Elemental Analysis Experimental study of anti-wear performance of nano lubricants in rotary machines gearboxes [Volume 6, Issue 2, 2019, Pages 30-38]
  • Equal Channel Angular Pressing Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
  • Experimental modal analysis Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
  • Explosive forming Experimental investigation of explosive forming of aluminum tubes using gas mixture [Volume 6, Issue 5, 2019, Pages 18-24]

F

  • Feature Extraction Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2019, Pages 1-12]
  • Fiber metal laminate Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass kevlar hybrid fibers [Volume 6, Issue 2, 2019, Pages 10-19]
  • Filler Investigation of fire resistance and mechanical properties of Glass Fiber Reinforced Polyester composites in the presence of nanoclay, magnesium hydroxide, aluminum hydroxide, zinc oxide [Volume 6, Issue 2, 2019, Pages 1-9]
  • Finite element method Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
  • Finite element method Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
  • Finite element model Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
  • Firmness index Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
  • Fixture Design Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]
  • Foam Density Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
  • Formability Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
  • Formation of bimetal tubes The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2019, Pages 1-9]
  • Forming force Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]
  • Forward extrusion The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2019, Pages 1-9]
  • Friction Stir Processing Evaluation of the effect of underwater friction stir welding on microstructure and tribological properties of copper and its alloy [Volume 6, Issue 7, 2019, Pages 42-51]
  • Friction stir vibration processing The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
  • Friction Stir Welding Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
  • Friction Stir Welding Study of the effect of instrument pin geometry on mechanical and microstructural properties of the welding region in the process of friction stir butt welding of AlMg6 [Volume 6, Issue 9, 2019, Pages 25-36]
  • Full-discretization method Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
  • Functionally graded materials (FGMs) Designing and manufacturing of functional diffusive machine and its performance evaluation in the fabrication of Al-Al2O3 samples [Volume 6, Issue 3, 2019, Pages 8-19]

G

  • Gas gun Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2019, Pages 45-53]
  • Gecko-like adhesive A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
  • GFRP Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
  • Glass/epoxy composite Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2019, Pages 54-66]
  • Gost 4784-97 aluminum alloy Study of the effect of instrument pin geometry on mechanical and microstructural properties of the welding region in the process of friction stir butt welding of AlMg6 [Volume 6, Issue 9, 2019, Pages 25-36]
  • Grinding Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2019, Pages 54-62]

H

  • Hardness testing Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating [Volume 6, Issue 1, 2019, Pages 12-23]
  • Hard to cut materials Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630) [Volume 6, Issue 8, 2019, Pages 21-32]
  • Heat Transfer Coefficient Experimental study of anti-wear performance of nano lubricants in rotary machines gearboxes [Volume 6, Issue 2, 2019, Pages 30-38]
  • Hot extrusion Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
  • Hot-press joining Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]
  • Hybrid fibers Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass kevlar hybrid fibers [Volume 6, Issue 2, 2019, Pages 10-19]
  • Hybrid friction Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]

I

  • Impact loading Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2019, Pages 45-53]
  • Inconel 738 Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
  • Incremental Forming Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]
  • Injection Molding Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
  • Injection Molding Controlling the warpage of plastic parts in injection molding process using the variation in coolant temperature of core and cavity [Volume 6, Issue 5, 2019, Pages 39-46]
  • Intermediate Canal Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
  • Internal turning tool Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]

J

  • Jamming Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]

L

  • Laser Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2019, Pages 37-44]
  • Leakage Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
  • Lost foam casting Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
  • Lost foam casting Study on the experimental and finite element simulation of aluminum Compounds manufactured in lost foam casting process in the Aerospace Industry [Volume 6, Issue 2, 2019, Pages 47-55]

M

  • Matching Design and build an active stereo scanner and validation of results from a metrological viewpoint [Volume 6, Issue 2, 2019, Pages 20-29]
  • MAX Phase The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
  • Measurement index Design and build an active stereo scanner and validation of results from a metrological viewpoint [Volume 6, Issue 2, 2019, Pages 20-29]
  • Mechanical properties The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
  • Mechanical properties Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
  • Mechanical properties Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
  • Mechanical properties Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
  • Mechanical properties Study of the effect of instrument pin geometry on mechanical and microstructural properties of the welding region in the process of friction stir butt welding of AlMg6 [Volume 6, Issue 9, 2019, Pages 25-36]
  • Mechanical Strength Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
  • Melt Flow Rate Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
  • Melting point Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
  • Metal-Composite hybrid energy absorber Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2019, Pages 54-66]
  • Micro/nano machining An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
  • Microstructure The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
  • Microstructure Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
  • Microstructure Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
  • Milling Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
  • Milling Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
  • Milling process Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
  • Minimum quantity lubrication (MQL) Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
  • Minimum quantity lubrication (MQL) Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630) [Volume 6, Issue 8, 2019, Pages 21-32]
  • Modeling and Optimization Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]

N

  • Nano-particles Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
  • Nanotechnology Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications [Volume 6, Issue 8, 2019, Pages 33-42]
  • Neural Network Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
  • Neutral point Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
  • Non-Destructive Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
  • Numerical analysis Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]

P

  • Pin geometry Study of the effect of instrument pin geometry on mechanical and microstructural properties of the welding region in the process of friction stir butt welding of AlMg6 [Volume 6, Issue 9, 2019, Pages 25-36]
  • Plastic Composite Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
  • Point cloud Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2019, Pages 37-44]
  • Polyester Resin Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
  • Polyether Ether Ketone Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2019, Pages 54-62]
  • Potato Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
  • Powder technology The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
  • Procast simulator Study on the experimental and finite element simulation of aluminum Compounds manufactured in lost foam casting process in the Aerospace Industry [Volume 6, Issue 2, 2019, Pages 47-55]
  • Process planning Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2019, Pages 1-12]
  • Production mechanism The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
  • Pultrusion Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]
  • Pure Copper Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]

Q

  • Quasi-static loading Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2019, Pages 54-66]

R

  • Recycling Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
  • Resistance spot welding Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
  • Robotic Gripper A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
  • Route sheets Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2019, Pages 1-12]

S

  • Scanning Depth of Field Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2019, Pages 37-44]
  • Sculptured Surface Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
  • SEM Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
  • Shelf life Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
  • Shrinkage Controlling the warpage of plastic parts in injection molding process using the variation in coolant temperature of core and cavity [Volume 6, Issue 5, 2019, Pages 39-46]
  • Si3N4 Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
  • SIC Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
  • SiC nano particles The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
  • Simulation Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
  • Single Grit Scratch Test Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2019, Pages 54-62]
  • Single Point Incremental Forming Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
  • Sintering Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
  • Slab Method Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
  • Solenoid A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
  • Sound test Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
  • Specific energy absorption Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2019, Pages 54-66]
  • Spring Back Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]
  • Square Tube Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
  • Stability lobe diagram Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
  • Stainless steel EN 1.4903 Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
  • Stereo vision Design and build an active stereo scanner and validation of results from a metrological viewpoint [Volume 6, Issue 2, 2019, Pages 20-29]
  • Surface composite The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
  • Surface Curvatures Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
  • Surface modification Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications [Volume 6, Issue 8, 2019, Pages 33-42]
  • Surface Quality An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
  • Surface roughness Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]

T

  • TCC Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
  • Temperature Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2019, Pages 13-24]
  • Tensile test Manufacture and Comparison of Mechanical Properties of Reinforced Polypropylene Nanocomposite with Carbon Fibers and Calcium Carbonate Nanoparticles [Volume 6, Issue 5, 2019, Pages 1-12]
  • Thermography Finite element analysis of vibro-thermography nondestructive testing technique via local defect resonance [Volume 6, Issue 7, 2019, Pages 24-33]
  • Thermoplastic composites Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]
  • TiB2 Fabrication and microstructural study of TiB2-based ceramics with SiC and Si3N4 additives [Volume 6, Issue 5, 2019, Pages 13-17]
  • Timoshenko beam Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2019, Pages 43-53]
  • Titanium Carbide Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating [Volume 6, Issue 1, 2019, Pages 12-23]
  • Tool and workpiece clamping Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
  • Tool geometry An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
  • Tube Hydroforming Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
  • TWBs Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
  • Two layer rod Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
  • Two layers sheet Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2019, Pages 10-20]

U

  • Ultrafine and nanostructure metals Review on accumulative roll bonding of ultrafine grained and nanostructured sheets [Volume 6, Issue 4, 2019, Pages 37-51]
  • Ultrasonic Vibration Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
  • Ultrasonic waves Finite element analysis of vibro-thermography nondestructive testing technique via local defect resonance [Volume 6, Issue 7, 2019, Pages 24-33]
  • Ultrasonic Welding Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]

W

  • Warpage Controlling the warpage of plastic parts in injection molding process using the variation in coolant temperature of core and cavity [Volume 6, Issue 5, 2019, Pages 39-46]
  • Water pipelines repair Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
  • Wear Evaluation of the effect of underwater friction stir welding on microstructure and tribological properties of copper and its alloy [Volume 6, Issue 7, 2019, Pages 42-51]
  • Welding coating Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating [Volume 6, Issue 1, 2019, Pages 12-23]

X

  • XRD Evaluation of the effect of underwater friction stir welding on microstructure and tribological properties of copper and its alloy [Volume 6, Issue 7, 2019, Pages 42-51]

Y

  • Y- shaped product Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]